Recycled plastic sheeting is a high density polyethylene product, with a smooth shiny surface, that is used for farm or commercial construction. 

Recycled plastic sheeting outlasts most conventional construction materials; compare this product to conventional building materials which require maintenance to prevent yellowing, splintering, rotting, delamination or rusting. 

This standard, agricultural grade sheeting has a 7 sheet minimum order, and is budget-friendly when factoring in how long it will outlast conventional building materials that need eventual replacement. 

To order: click on the item at the bottom of this page or call us at 865.738.3439. 

Want to see what else we have? View all Sheeting Options here.

Pricing:

• Minimum order quantity:  7 sheets
• Cut Charge:  $6/Cut, 2 max cuts per sheet
• Technical Data: PDF

• Thickness	Size	Available Colors	Weight	Price (ea)
  1/16″	4′ x 8′	White	11 lbs	$47
  	4′ x 50′	White	66 lbs	$221
  	4′ x 100′	White	132 lbs	$439
  1/8″	4′ x 8′	Black or White	20 lbs	$78
  	4′ x 10′	Black or White	25 lbs	$86
  	4′ x 12′	Black or White	30 lbs	$104
  	4′ x 50′	White	250 lbs	$424
  	4′ x 100′	White	250 lbs	$784
  The 1/8″ will not lay 100% flat due to manufacturing restraints.
  1/4″	4′ x 8′	Black or White	40 lbs	$134
  	4′ x 10′	Black or White	50 lbs	$141
  	4′ x 12′	Black or White	60 lbs	$168
  3/8″	4′ x 8′	Black or White	60 lbs	$206
  	4′ x 10′	Black or White	76 lbs	$221
  	4′ x 12′	Black or White	91 lbs	$262
  				XXX
  1/2″	4′ x 8′	Black or White	80 lbs	$258
  	4′ x 10′	Black or White	100 lbs	$292
  	4′ x 12′	Black or White	120 lbs	$348

To order, click on the item at the bottom of this page or call us at 865.738.3439.

Recycled Plastic HDPE Sheeting, Standard:

• Available in 1/16″ up to 1/2″ only.
• Colors: White or Black (Not available in all sizes)
• Minimum order quantity: 7 sheets.
• Custom Cut Charge:  $3/Cut
• Technical Data: PDF
• Installation Instructions:   Allow the plastic sheeting to rest in building for at least 24 hours before install.  During this period, maintain the building at normal operating temperature.  This allows the product to assume the temperature characteristics of the building, minimizing expansion or contraction after installation.  Install boards at normal operating temperature.  Drill oversized pilot holes through the sheet for each fastener (1/4″ diameter hole is usually adequate).    Keep holes at least 1″ from any edges of the plastic.   Closer than 1″ will cause weakness and possible splitting at the edges.  Always  leave 1/8″ gap  between flat boards. Install using stainless steel bugle head screw with flat ¼” stainless washers.  Note sheeting is slick when wet, so the product is not    recommended for flooring applications.

  

• Order & Shipping Information
• Return Policy

• To order, click on the item at the bottom of this page or call us at 865.738.3439.

• Sheeting is USA Made.
• Wide selection of sizes: 1/16″ up to 1/2″
• Available in your choice of White or Black.

This product is available in White or Black only.